{"supportedSocialProviders":["github","google","saml"],"intercomAppId":"yg02r5dz","mixpanelToken":"balena-main","recurlyPublicKey":"ewr1-sVfwUfcUuC7Gy3wTY0jkmt","stripePublicKey":"pk_live_51Pt2mpFnsdbscmQzJVzEQqNKB4z21Quw7cvVRva6FU9sMzYyE40kUiObURfiqpZi6oeLpDx0SauFh3DkC2LdbAAG00aIf1tgfi","deviceUrlsBase":"balena-devices.com","gitServerUrl":"git.balena-cloud.com","adminUrl":"https://admin.balena-cloud.com","debugEnabled":false,"ga":{"id":"","site":""},"deviceTypes":[{"slug":"n510-tx2","version":1,"aliases":["n510-tx2"],"name":"Aetina N510 TX2","arch":"aarch64","state":"RELEASED","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Aetina N510 TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the carrier board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"n510-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-n510-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"revpi-connect-s","version":1,"name":"Revolution Pi Connect S (NEW)","arch":"aarch64","state":"NEW","instructions":["While not having the Revolution Pi board powered, connect your system to the board's USB port via a micro-USB cable.","Power on the Revolution Pi board.","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","When flashing is complete, power off the board and unplug the micro-USB cable.","Connect your Revolution Pi Connect S to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"revpi-connect-s","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-revpi-connect-s.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.3+rev4"},{"slug":"iot-link","version":1,"name":"Compulab IOT-LINK Gateway","arch":"aarch64","stateInstructions":{"postProvisioning":["Remove and re-connect power to the board."]},"instructions":["Please check the readme or the image download modal in balena-cloud for flashing instructions","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iot-link/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iot-link/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iot-link/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iot-link","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-iot-link.balenaos-img","deployFlasherArtifact":"balena-image-flasher-iot-link.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev8"},{"slug":"tdpzu9","version":1,"aliases":[],"name":"Topic Florida Plus (tdpzu9)","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Topic Florida Plus (tdpzu9).","Connect your Topic Florida Plus (tdpzu9) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/","osx":"https://www.balena.io/docs/learn/getting-started/","linux":"https://www.balena.io/docs/learn/getting-started/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"tdpzu9","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-tdpzu9.balenaos-img"},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"4.0.16+rev1"},{"slug":"jetson-tx1","version":1,"aliases":["jetson-tx1"],"name":"Nvidia Jetson TX1 (EXPERIMENTAL)","arch":"aarch64","state":"EXPERIMENTAL","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nvidia Jetson TX1.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Press and hold for 1 second the POWER push button.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."],"imageDownloadAlerts":[{"type":"warning","message":"ResinOS is tested along side L4T 28.1.0. Other versions of L4T might not be able to boot ResinOS."}],"gettingStartedLink":{"windows":"https://docs.resin.io/jetson-tx1/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/jetson-tx1/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/jetson-tx1/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-tx1","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-jetson-tx1.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":10},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.29.2+rev2.prod"},{"slug":"firefly-rk3288","version":1,"aliases":["firefly-rk3288"],"name":"FireFly rk3288","arch":"armv7hf","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the FireFly rk3288.","Connect your FireFly rk3288 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/","osx":"https://www.balena.io/","linux":"https://www.balena.io/"},"supportsBlink":true,"yocto":{"machine":"firefly-rk3288","image":"resin-image","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-firefly-rk3288.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.38.3+rev10.prod","logoUrl":"https://files.balena-cloud.com/images/firefly-rk3288/2.38.3%2Brev10.prod/logo.svg"},{"slug":"jetson-nano-emmc","version":1,"aliases":["jetson-nano-emmc"],"name":"Nvidia Jetson Nano eMMC","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Nano Devkit eMMC board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-nano-emmc","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-nano-emmc.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":12,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev4"},{"slug":"beaglebone-pocket","version":1,"name":"PocketBeagle","arch":"armv7hf","state":"RELEASED","imageDownloadAlerts":[{"type":"warning","message":"To obtain internet connectivity from a Linux host via onboard microUSB, open nm-connection-editor on the host and edit the connection created by PocketBeagle when plugged. In the \"IPv4 Settings\" tab > Method > select \"Shared to other computers\". Then disconnect the board and plug it back in."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the PocketBeagle.","Connect your PocketBeagle to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone-pocket","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-beaglebone-pocket.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev1"},{"slug":"genericx86-64-ext","version":1,"aliases":["genericx86-64-ext"],"name":"Generic x86_64 (legacy MBR) (NEW)","arch":"amd64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Generic x86_64 (legacy MBR).","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Please make sure you do not have any other USB keys inserted.\nPower up the hardware. Make sure you have a keyboard connected.\nPress the F10 key (may differ on some platforms) while BIOS is loading in order to enter the boot menu.\nNext, select the name of your USB key.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"genericx86-64-ext","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-genericx86-64-ext.balenaos-img","deployFlasherArtifact":"balena-image-flasher-genericx86-64-ext.balenaos-img","deployRawArtifact":"balena-image-genericx86-64-ext.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.5+rev2"},{"slug":"edge","isDependent":true,"name":"Edge Device Builder (DISCONTINUED)","arch":"amd64","state":"DISCONTINUED","initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"yocto":{"machine":"","deployArtifact":"empty","archive":true},"options":[{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"private":false,"buildId":"1.1.1"},{"slug":"colibri-imx6dl","version":1,"aliases":["colibri-imx6"],"name":"Colibri iMX6dl (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Colibri iMX6dl.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect the carrier board to a host computer using a serial cable. (This step may differ based on what carrier board you have)","Power the module. Press SPACE when prompted by U-Boot to stop execution and run the following command `run sdboot`","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-colibri-imx6.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-colibri-imx6.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-colibri-imx6.md#on-mac-and-linux"},"supportsBlink":false,"yocto":{"machine":"colibri-imx6","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-flasher-colibri-imx6.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"artik530","version":1,"aliases":["artik530"],"name":"Samsung Artik 530 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Wait 30 seconds or until the red LED 402 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Samsung Artik 530.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:on.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button.","The device is performing a shutdown. Wait 30 seconds or until the red LED 402 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/artik530/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/artik530/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/artik530/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"artik530","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-artik530.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.30.0+rev2.prod"},{"slug":"owa5x","version":1,"name":"owa5x","arch":"aarch64","state":"RELEASED","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Insert SD CARD. Power up the device","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the owa5x.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert SD CARD. Power up the device","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Insert SD CARD. Power up the device","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/owa5x/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/owa5x/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/owa5x/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"owa5x","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-owa5x.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.4+rev1"},{"slug":"raspberrypi0-2w-64","version":1,"name":"Raspberry Pi Zero 2 W (64bit)","arch":"aarch64","state":"RELEASED","isDefault":true,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi Zero 2 W (64bit).","Connect your Raspberry Pi Zero 2 W (64bit) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi0-2w-64/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi0-2w-64/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi0-2w-64/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi0-2w-64","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi0-2w-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev1"},{"slug":"jetson-xavier-nx-devkit-seeed-2mic-hat","version":1,"aliases":["jetson-xavier-nx-devkit-seeed-2mic-hat"],"name":"Nvidia Jetson Xavier NX Devkit SD Seeed ReSpeaker-2Mic","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Remove power from the Jetson Xavier NX Devkit SD-CARD with Seed Respeaker 2MIC HAT and insert the freshly burnt sd-card.","Power on the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-xavier-nx-devkit-seeed-2mic-hat","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-xavier-nx-devkit-seeed-2mic-hat.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":9},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"jetson-tx2","version":1,"aliases":["jetson-tx2"],"name":"Nvidia Jetson TX2","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nvidia Jetson TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Remove and re-connect power to the board.","Press and hold for 1 second the POWER push button.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-jetson-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.5+rev2"},{"slug":"rockpro64","version":1,"name":"ROCKPro64 (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ROCKPro64.","Connect your ROCKPro64 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/rockpro64/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/rockpro64/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/rockpro64/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"rockpro64","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-rockpro64.balenaos-img","compressed":true},"configuration":{"config":{"partition":1,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"photon-tx2-nx","version":1,"aliases":["photon-tx2-nx"],"name":"CTI Photon TX2 NX","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Put the CTI Photon TX2 NX board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/jetson-nano-emmc/nodejs/#adding-your-first-device","osx":"https://www.balena.io/docs/learn/getting-started/jetson-nano-emmc/nodejs/#adding-your-first-device","linux":"https://www.balena.io/docs/learn/getting-started/jetson-nano-emmc/nodejs/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"photon-tx2-nx","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-photon-tx2-nx.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":24},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.5+rev1"},{"slug":"raspberrypicm4-ioboard","version":1,"aliases":["raspberrypicm4-ioboard"],"name":"Raspberry Pi CM4 IO Board (NEW)","arch":"aarch64","state":"NEW","instructions":["Unzip the image downloaded from the dashboard.","If using a CM4 Lite: write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>. After flashing, insert the freshly burnt SD card into the IO Board","If using a CM4 eMMC: fit jumper to disable eMMC boot on J2 and connect the IO Board's microUSB port to your PC. Power the board and use <a href=\"https://github.com/raspberrypi/usbboot\">usbboot</a> to put the eMMC in mass storage mode. Write the OS file you downloaded to mass storage device.","Disconnect the power source and eMMC boot jumper if using the CM4 eMMC. Connect the CM4 IO Board to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypicm4-ioboard/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypicm4-ioboard/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypicm4-ioboard/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypicm4-ioboard","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypicm4-ioboard.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.3+rev2"},{"slug":"jetson-tx2-nx-devkit","version":1,"name":"Nvidia Jetson TX2 NX (with Xavier NX Devkit)","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson TX2 NX board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2-nx-devkit/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2-nx-devkit/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2-nx-devkit/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-tx2-nx-devkit","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-tx2-nx-devkit.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":24},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev4"},{"slug":"iot-gate-imx8","version":1,"name":"Compulab IOT-GATE-iMX8","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Compulab IOT-GATE-iMX8.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert USB STICK. Device will automatically boot from USB","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iot-gate-imx8/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iot-gate-imx8/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iot-gate-imx8/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iot-gate-imx8","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-iot-gate-imx8.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.0+rev4"},{"slug":"rockpi-4b-rk3399","version":1,"name":"ROCK Pi 4B (NEW)","arch":"aarch64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until the blue LED stops flashing (powered off).","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ROCK Pi 4B.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","The device is performing a shutdown. Please wait until the blue LED stops flashing (powered off).","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/rockpi-4b-rk3399/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/rockpi-4b-rk3399/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/rockpi-4b-rk3399/nodejs/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"rockpi-4b-rk3399","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-rockpi-4b-rk3399.balenaos-img","compressed":true},"configuration":{"config":{"partition":4,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.18+rev100"},{"slug":"raspberrypi3","version":1,"aliases":["raspberrypi3"],"name":"Raspberry Pi 3","arch":"armv7hf","state":"RELEASED","isDefault":true,"imageDownloadAlerts":[{"type":"warning","message":"The Raspberry Pi 3 is not capable of connecting to 5GHz WiFi networks unless you use an external WiFi adapter that supports it. The Raspberry Pi 3 B+ is capable of connecting to both 5GHz and 2.4GHz networks."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 3.","Connect your Raspberry Pi 3 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi3","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi3.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev2"},{"slug":"phyboard-lyra-am62xx-2","version":1,"aliases":["phyboard-lyra-am62xx-2"],"name":"phyBOARD-AM62x","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the phyBOARD-AM62x.","Connect your phyBOARD-AM62x to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/phyboard-lyra-am62xx-2/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/phyboard-lyra-am62xx-2/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/phyboard-lyra-am62xx-2/nodejs/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"phyboard-lyra-am62xx-2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-phyboard-lyra-am62xx-2.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.7+rev1"},{"slug":"ucm-imx93","version":1,"name":"Compulab UCM-iMX93 Devkit","arch":"aarch64","stateInstructions":{"postProvisioning":[]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Compulab UCM-iMX93 Devkit.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first."],"gettingStartedLink":{"windows":"http://docs.balena.io/ucm-imx93/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/ucm-imx93/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/ucm-imx93/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"ucm-imx93","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-ucm-imx93.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev3"},{"slug":"iotdin-imx8p-d1d8","version":1,"name":"Compulab IOTDIN-iMX8P 1G-8G DRAM","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["Remove and re-connect power to the board."]},"instructions":["Please check the readme or the image download modal in balena-cloud for flashing instructions","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iotdin-imx8p/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iotdin-imx8p/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iotdin-imx8p/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iotdin-imx8p-d1d8","image":"balena-image","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-iotdin-imx8p-d1d8.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.1+rev2"},{"slug":"kitra710","version":1,"aliases":["kitra710"],"name":"RushUp Kitra 710 (DISCONTINUED)","arch":"aarch64","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Wait 30 seconds or until the blue LED 703 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the RushUp Kitra 710.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:on.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button.","The device is performing a shutdown. Wait 30 seconds or until the blue LED 703 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/kitra710/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/kitra710/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/kitra710/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"kitra710","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-kitra710.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.29.2+rev2.prod"},{"slug":"nanopi-r2c","version":1,"name":"NanoPi R2C (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the NanoPi R2C.","Connect your NanoPi R2C to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/nanopi-r2c/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/nanopi-r2c/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/nanopi-r2c/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"nanopi-r2c","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-nanopi-r2c.balenaos-img","compressed":true},"configuration":{"config":{"partition":4,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"5.4.1+rev39"},{"slug":"kontron-mx8mm","version":1,"aliases":[],"name":"Kontron i.MX8M Mini","arch":"aarch64","state":"RELEASED","isDefault":true,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Kontron i.MX8M Mini.","Connect your Kontron i.MX8M Mini to the internet, then power it up."],"supportsBlink":false,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"kontron-mx8mm","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-kontron-mx8mm.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.4+rev1"},{"slug":"photon-xavier-nx","version":1,"aliases":["photon-xavier-nx"],"name":"CTI Photon Xavier NX","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Put the carrier board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"photon-xavier-nx","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-photon-xavier-nx.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":9},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.5+rev1"},{"slug":"raspberrypi5","version":1,"name":"Raspberry Pi 5","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 5.","Connect your Raspberry Pi 5 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi5/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi5/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi5/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi5","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi5.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.3+rev4"},{"slug":"revpi-connect","version":1,"name":"Revolution Pi Connect (NEW)","arch":"armv7hf","state":"NEW","instructions":["While not having the Revolution Pi board powered, connect your system to the board's USB port via a micro-USB cable.","Power on the Revolution Pi board.","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","When flashing is complete, power off the board and unplug the micro-USB cable.","Connect your Revolution Pi Connect to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"revpi-connect","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-revpi-connect.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev4"},{"slug":"iot-gate-imx8plus","version":1,"name":"Compulab IOT-GATE-iMX8PLUS 2G-4G DRAM","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["Remove and re-connect power to the board."]},"instructions":["Please check the readme or the image download modal in balena-cloud for flashing instructions","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iot-gate-imx8plus/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iot-gate-imx8plus/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iot-gate-imx8plus/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iot-gate-imx8plus","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-iot-gate-imx8plus.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3+rev6"},{"slug":"raspberry-pi","version":1,"aliases":["raspberrypi"],"name":"Raspberry Pi (v1 / Zero / Zero W)","arch":"rpi","state":"RELEASED","imageDownloadAlerts":[{"type":"warning","message":"The Raspberry Pi Zero W is not capable of connecting to 5GHz WiFi networks unless you use an external WiFi adapter that supports it."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi (v1 / Zero / Zero W).","Connect your Raspberry Pi (v1 / Zero / Zero W) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberry-pi/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberry-pi/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberry-pi/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev1"},{"slug":"raspberrypi4-64","version":1,"aliases":["raspberrypi4-64"],"name":"Raspberry Pi 4","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 4.","Connect your Raspberry Pi 4 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi4-64","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi4-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.3+rev4"},{"slug":"odyssey-x86","version":1,"aliases":["odyssey-x86"],"name":"Seeed ODYSSEY-X86 (NEW)","arch":"amd64","state":"NEW","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Seeed ODYSSEY-X86.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Please make sure you do not have any other USB keys inserted.\nPower up the hardware. Make sure you have a keyboard connected.\nPress the F7 key (may differ on some platforms) while BIOS is loading in order to enter the boot menu.\nNext, select the name of your USB key.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"odyssey-x86","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-odyssey-x86.balenaos-img","deployFlasherArtifact":"balena-image-flasher-odyssey-x86.balenaos-img","deployRawArtifact":"balena-image-odyssey-x86.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"jetson-xavier","version":1,"name":"Nvidia Jetson Xavier","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Xavier board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-xavier","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-jetson-xavier.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":37},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.26+rev234"},{"slug":"bluechiptechnology-tm3","version":1,"aliases":["bluechiptechnologytm3"],"name":"Blue Chip Technology TM3","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Blue Chip Technology TM3.","Connect your Blue Chip Technology TM3 to the internet, then power it up."],"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"tm3","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-tm3.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.4+rev2"},{"slug":"raspberry-pi2","version":1,"aliases":["raspberrypi2"],"name":"Raspberry Pi 2","arch":"armv7hf","state":"RELEASED","imageDownloadAlerts":[{"type":"warning","message":"The Raspberry Pi 2 is not capable of connecting to WiFi networks without an external adapter."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 2.","Connect your Raspberry Pi 2 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberry-pi2/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberry-pi2/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberry-pi2/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi2","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-raspberrypi2.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"orange-pi-lite","version":1,"name":"Orange Pi Lite","arch":"armv7hf","state":"RELEASED","private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Orange Pi Lite.","Connect your Orange Pi Lite to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted.md#on-mac-and-linux"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"orange-pi-lite","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-orange-pi-lite.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"smarc-px30","version":1,"name":"I-Pi SMARC PX30 SD-CARD","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the I-Pi SMARC PX30 SD-CARD.","Connect your I-Pi SMARC PX30 SD-CARD to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/smarc-px30/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/smarc-px30/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/smarc-px30/nodejs/"},"yocto":{"machine":"smarc-px30","image":"balena-image","fstype":"balenaos-img","version":"yocto-thud","deployArtifact":"balena-image-smarc-px30.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.112.6"},{"slug":"jetson-agx-orin-devkit","version":1,"name":"Nvidia Jetson AGX Orin Devkit","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson AGX Orin board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> at v0.5.32 or newer to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-agx-orin-devkit/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-agx-orin-devkit/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-agx-orin-devkit/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-agx-orin-devkit","image":"balena-image","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-jetson-agx-orin-devkit.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":6},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"revpi-connect-4","version":1,"name":"Revolution Pi Connect 4 (NEW)","arch":"aarch64","state":"NEW","instructions":["While not having the Revolution Pi board powered, connect your system to the board's USB port via a micro-USB cable.","Power on the Revolution Pi board.","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","When flashing is complete, power off the board and unplug the micro-USB cable.","Connect your Revolution Pi Connect 4 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"revpi-connect-4","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-revpi-connect-4.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev2"},{"slug":"qemux86-64","version":1,"name":"QEMU X86 64bit","arch":"amd64","state":"RELEASED","instructions":["Run the following to start the image:\n<br>\nOn systems with KVM support:\n<br>\n<code>qemu-system-x86_64 -device ahci,id=ahci -drive file=balena-image-qemux86-64.img,media=disk,cache=none,format=raw,if=none,id=disk -device ide-hd,drive=disk,bus=ahci.0 -net nic,model=virtio -net user -m 512 -nographic -machine type=pc,accel=kvm -smp 4 -cpu host</code>\n<br>\nOn systems without KVM support:\n<br>\n<code>qemu-system-x86_64 -device ahci,id=ahci -drive file=balena-image-qemux86-64.img,media=disk,cache=none,format=raw,if=none,id=disk  -device ide-hd,drive=disk,bus=ahci.0 -net nic,model=virtio -net user -m 512 -nographic -machine type=pc -smp 4</code>\n<br>\nTweak <code>-smp</code> and <code>-cpu</code> parameters based on the CPU of the machine qemu is running on. <code>-cpu</code> parameter needs to be dropped on OSX and Windows.\n<br>\nTweak <code>-nographic</code> and <code>-m 512</code> to set the display of qemu and memory respectively.\n"],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/qemux86-64/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/qemux86-64/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/qemux86-64/nodejs/"},"supportsBlink":true,"yocto":{"machine":"qemux86-64","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-qemux86-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"options":[{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"buildId":"2.83.18+rev5.prod","logoUrl":"https://files.balena-cloud.com/images/qemux86-64/2.83.18%2Brev5.prod/logo.svg"},{"slug":"asus-tinker-board","version":1,"aliases":["asus-tinker-board"],"name":"Asus Tinker Board (EXPERIMENTAL)","arch":"armv7hf","state":"EXPERIMENTAL","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Asus Tinker Board.","Connect your Asus Tinker Board to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/asus-tinker-board/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/asus-tinker-board/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/asus-tinker-board/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"asus-tinker-board","image":"resin-image","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-asus-tinker-board.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.38.3+rev1.prod","logoUrl":"https://files.balena-cloud.com/images/asus-tinker-board/2.38.3%2Brev1.prod/logo.svg"},{"slug":"jetson-xavier-nx-devkit","version":1,"aliases":["jetson-xavier-nx-devkit"],"name":"Nvidia Jetson Xavier NX Devkit SD-CARD","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Xavier NX Devkit SD-CARD board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit-sd-card/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit-sd-card/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit-sd-card/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-xavier-nx-devkit","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-xavier-nx-devkit.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":9},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.26+rev234"},{"slug":"jetson-agx-orin-devkit-64gb","version":1,"name":"Nvidia Jetson AGX Orin 64GB Devkit","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson AGX Orin Devkit 64GB in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-agx-orin-devkit-64gb/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-agx-orin-devkit-64gb/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-agx-orin-devkit-64gb/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-agx-orin-devkit-64gb","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-jetson-agx-orin-devkit-64gb.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"asus-tinker-edge-t","version":1,"name":"ASUS Tinker Edge T (NEW)","arch":"aarch64","state":"NEW","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the eMMC position.","Remove and re-connect power to the board."]},"instructions":["Set the BOOT_SELECT switch to the SD-CARD position.","Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ASUS Tinker Edge T.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the eMMC position.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/","osx":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/","linux":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/"},"supportsBlink":false,"yocto":{"machine":"asus-tinker-edge-t","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-warrior","deployArtifact":"balena-image-flasher-asus-tinker-edge-t.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"bluechiptechnology-db1","version":1,"aliases":["bluechiptechnologydb1"],"name":"Blue Chip Technology DB1","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Blue Chip Technology DB1.","Connect your Blue Chip Technology DB1 to the internet, then power it up."],"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"db1","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-db1.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":7},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"surface-go","version":1,"name":"Microsoft Surface Go (NEW)","arch":"amd64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Press the Power button."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Microsoft Surface Go.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Press and hold the Volume Down button and press the Power button. Release the Power button but keep pressing the Volume Down button until the windows logo disappears.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Press the Power button."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"surface-go","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-surface-go.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"qemux86","version":1,"name":"QEMU X86 32bit","arch":"i386","state":"RELEASED","instructions":["Run the following to start the image:\n<br>\nOn systems with KVM support:\n<br>\n<code>qemu-system-i386 -device ahci,id=ahci -drive file=balena-image-qemux86.img,media=disk,cache=none,format=raw,if=none,id=disk -device ide-hd,drive=disk,bus=ahci.0 -net nic,model=virtio -net user -m 512 -nographic -machine type=pc,accel=kvm -smp 4 -cpu host</code>\n<br>\nOn systems without KVM support:\n<br>\n<code>qemu-system-i386 -device ahci,id=ahci -drive file=balena-image-qemux86.img,media=disk,cache=none,format=raw,if=none,id=disk  -device ide-hd,drive=disk,bus=ahci.0 -net nic,model=virtio -net user -m 512 -nographic -machine type=pc -smp 4</code>\n<br>\nTweak <code>-smp</code> and <code>-cpu</code> parameters based on the CPU of the machine qemu is running on. <code>-cpu</code> parameter needs to be dropped on OSX and Windows.\n<br>\nTweak <code>-nographic</code> and <code>-m 512</code> to set the display of qemu and memory respectively.\n"],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/qemux86/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/qemux86/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/qemux86/nodejs/"},"supportsBlink":true,"yocto":{"machine":"qemux86","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-qemux86.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"options":[{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"buildId":"2.83.18+rev5.prod","logoUrl":"https://files.balena-cloud.com/images/qemux86/2.83.18%2Brev5.prod/logo.svg"},{"slug":"orangepi-plus2","version":1,"name":"Orange Pi Plus2","arch":"armv7hf","state":"RELEASED","private":false,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Orange Pi Plus2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect your Orange Pi Plus2 to the internet, then power it up.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/orangepi-plus2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/orangepi-plus2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/orangepi-plus2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"orangepi-plus2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-orangepi-plus2.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.7"},{"slug":"advantech-ecu1370","version":1,"name":"Advantech ECU-1370","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Switch SW2 to 1: ON, 2: OFF and power on the board.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Switch SW2 to 1: OFF, 2: ON. Insert SD card and power on the board. Wait for LP3 to turn on, wait 10 seconds and power off the board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Switch SW2 to 1: ON, 2: OFF and power on the board.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iot-gate-imx8/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iot-gate-imx8/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iot-gate-imx8/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"imx8mq-ecu1370","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8mq-ecu1370.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"5.3.21+rev2"},{"slug":"imx8mp-var-dart","version":1,"name":"Variscite DART-MX8M-PLUS","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Configure the SW7 boot dip switch to boot from eMMC (set it to INT position).","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite DART-MX8M-PLUS.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Configure the SW7 boot dip switch to boot from SD Card (set it to EXT position) and power on the board. Let it boot and perform the automatic install of balenaOS onto the eMMC.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Configure the SW7 boot dip switch to boot from eMMC (set it to INT position).","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/imx8mp-var-dart/nodejs/","osx":"https://docs.balena.io/learn/getting-started/imx8mp-var-dart/nodejs/","linux":"https://docs.balena.io/learn/getting-started/imx8mp-var-dart/nodejs/"},"supportsBlink":false,"yocto":{"machine":"imx8mp-var-dart","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8mp-var-dart.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.10"},{"slug":"nanopi-neo-air","version":1,"name":"Nanopi Neo Air","arch":"armv7hf","state":"RELEASED","private":false,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nanopi Neo Air.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect your Nanopi Neo Air to the internet, then power it up.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/nanopi-neo-air/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/nanopi-neo-air/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/nanopi-neo-air/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"nanopi-neo-air","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-nanopi-neo-air.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.7"},{"slug":"iotdin-imx8p","version":1,"name":"Compulab IOTDIN-iMX8P 2G-4G DRAM","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["Remove and re-connect power to the board."]},"instructions":["Please check the readme or the image download modal in balena-cloud for flashing instructions","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iotdin-imx8p/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iotdin-imx8p/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iotdin-imx8p/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iotdin-imx8p","image":"balena-image","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-iotdin-imx8p.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.1+rev2"},{"slug":"generic-amd64","version":1,"aliases":["generic-amd64"],"name":"Generic x86_64 (GPT) (NEW)","arch":"amd64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Generic x86_64 (GPT).","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Please make sure you do not have any other USB keys inserted.\nPower up the hardware. Make sure you have a keyboard connected.\nPress the F10 key (may differ on some platforms) while BIOS is loading in order to enter the boot menu.\nNext, select the name of your USB key.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"generic-amd64","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-generic-amd64.balenaos-img","deployFlasherArtifact":"balena-image-flasher-generic-amd64.balenaos-img","deployRawArtifact":"balena-image-generic-amd64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3+rev2"},{"slug":"orange-pi-one","version":1,"name":"Orange Pi One (NEW)","arch":"armv7hf","state":"NEW","community":true,"private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Orange Pi One.","Connect your Orange Pi One to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"orange-pi-one","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-orange-pi-one.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"imx8mm-var-dart","version":1,"name":"Variscite DART-MX8M Mini","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the SW7 BOOT SELECT switch to INT.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite DART-MX8M Mini.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set the SW7 BOOT SELECT switch to EXT. Insert SD CARD. Power up the Variscite DART-MX8M Mini.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the SW7 BOOT SELECT switch to INT.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/imx8mm-var-dart/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/imx8mm-var-dart/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/imx8mm-var-dart/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"imx8mm-var-dart","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8mm-var-dart.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.11+rev1"},{"slug":"beaglebone-black","version":1,"aliases":["beaglebone"],"name":"BeagleBone Black","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBone Black.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the BeagleBone Black while holding down the small button near the SD slot. You need to keep it pressed until the blue LEDs start flashing wildly.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beaglebone.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.8"},{"slug":"odroid-c1","version":1,"aliases":["odroid-c1"],"name":"ODROID-C1+ (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ODROID-C1+.","Connect your ODROID-C1+ to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/odroid-c1/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/odroid-c1/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/odroid-c1/nodejs/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"odroid-c1","image":"balena-image","fstype":"balenaos-img","version":"yocto-sumo","deployArtifact":"balena-image-odroid-c1.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.105.22"},{"slug":"surface-pro-6","version":1,"name":"Microsoft Surface 6 (NEW)","arch":"amd64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Press the Power button."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Microsoft Surface 6.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Press and hold the Volume Down button and press the Power button. Release the Power button but keep pressing the Volume Down button until the windows logo disappears.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Press the Power button."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"surface-pro-6","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-surface-pro-6.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"zynq-xz702","version":1,"aliases":["zc702-zynq7"],"name":"Zynq ZC702 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Zynq ZC702.","Connect your Zynq ZC702 to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#on-mac-and-linux"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"yocto":{"machine":"zc702-zynq7","image":"resin-image","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-zc702-zynq7.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"npe-x500-m3","version":1,"aliases":["npe-x500-m3"],"name":"NPE X500 M3","arch":"armv7hf","state":"RELEASED","community":true,"imageDownloadAlerts":[{"type":"warning","message":"The Raspberry Pi 3 is not capable of connecting to 5GHz WiFi networks unless you use an external WiFi adapter that supports it. The Raspberry Pi 3 B+ is capable of connecting to both 5GHz and 2.4GHz networks."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the NPE X500 M3.","Connect your NPE X500 M3 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"npe-x500-m3","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-npe-x500-m3.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"intel-nuc","version":1,"aliases":["nuc"],"name":"Intel NUC","arch":"amd64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Intel NUC.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Make sure Secure Boot is disabled in BIOS.","Please make sure you do not have any other USB keys inserted.\nPower up the Intel NUC. Make sure you have a keyboard connected.\nPress the F10 key (may differ on some platforms) while BIOS is loading in order to enter the boot menu.\nNext, select the name of your USB key.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Power on your device."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/intel-nuc/nodejs/"},"yocto":{"machine":"genericx86-64","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-genericx86-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.5+rev2"},{"slug":"jetson-xavier-nx-devkit-emmc","version":1,"name":"Jetson Xavier NX Devkit eMMC","arch":"aarch64","state":"RELEASED","instructions":["Put the carrier board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-xavier-nx-devkit-emmc","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-jetson-xavier-nx-devkit-emmc.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":9},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.26+rev234"},{"slug":"jetson-nano","version":1,"aliases":["jetson-nano"],"name":"Nvidia Jetson Nano SD-CARD","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Nano SD-CARD in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-nano","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-nano.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":12,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev4"},{"slug":"up-board","version":1,"name":"UP Board","arch":"amd64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Unplug and plug power on your UP Board."]},"instructions":["Write the OS file you downloaded to your USB key. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the UP Board.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the UP Board. Make sure you have a keyboard connected.\nPress the F7 key while BIOS is loading in order to enter the boot menu. Next, select the \"UEFI:\" option.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Unplug and plug power on your UP Board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/up-board/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/up-board/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/up-board/nodejs/"},"yocto":{"machine":"up-board","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-up-board.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3+rev2"},{"slug":"orbitty-tx2","version":1,"aliases":["orbitty-tx2"],"name":"CTI Orbitty TX2","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until the SYS LED is turned off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the CTI Orbitty TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the carrier board.","The device is performing a shutdown. Please wait until the SYS LED is turned off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"orbitty-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-orbitty-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"var-som-mx6","version":1,"name":"Variscite VAR-SOM-MX6","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the NAND position","Remove and re-connect power to the board."]},"instructions":["Set the BOOT_SELECT switch to the MMC position","Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the NAND position","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"var-som-mx6","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-var-som-mx6.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"ts4900","version":1,"aliases":["ts4900"],"name":"Technologic TS-4900","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Disable the SD boot jumper present on your specific base board.","Remove and re-connect power to the board."]},"imageDownloadAlerts":[{"type":"danger","message":"Please make sure to select the correct number of CPU Cores for your device. Failing to do so will brick your device."},{"type":"warning","message":"In order to have usable WiFi connectivity, make sure you have attached a WiFi antenna to your WiFi module."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Technologic TS-4900.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Enable the SD boot jumper present on your specific base board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Disable the SD boot jumper present on your specific base board.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/installing/gettingStarted-TS4900/#adding-your-first-device","osx":"https://docs.resin.io/installing/gettingStarted-TS4900/#adding-your-first-device","linux":"https://docs.resin.io/installing/gettingStarted-TS4900/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"ts4900","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-flasher-ts4900.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"board","message":"Board Options","options":[{"name":"processorCore","message":"CPU Cores","type":"list","choices":["single","quad"]}]},{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"},"operations":[{"command":"copy","from":{"partition":{"primary":1},"path":"/u-boot-ts4900.imx-single"},"to":{"partition":{"primary":1},"path":"/u-boot.imx"},"when":{"processorCore":"single"}},{"command":"copy","from":{"partition":{"primary":1},"path":"/u-boot-ts4900.imx-quad"},"to":{"partition":{"primary":1},"path":"/u-boot.imx"},"when":{"processorCore":"quad"}}]},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.47.1+rev1.prod","logoUrl":"https://files.balena-cloud.com/images/ts4900/2.47.1%2Brev1.prod/logo.svg"},{"slug":"parallella","version":1,"aliases":["parallella-hdmi-resin"],"name":"Parallella (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Parallella.","Connect your Parallella to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-Parallella.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-Parallella.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-Parallella.md#on-mac-and-linux"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"message":"Processor","name":"processorType","type":"list","choices":["Z7010","Z7020"]},{"message":"Coprocessor cores","name":"coprocessorCore","type":"list","choices":["16","64"]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"yocto":{"machine":"parallella-hdmi-resin","image":"resin-image","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-parallella-hdmi-resin.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"},"operations":[{"command":"copy","from":{"partition":{"primary":1},"path":"/bitstreams/parallella_e16_headless_gpiose_7010.bit.bin"},"to":{"partition":{"primary":1},"path":"/parallella.bit.bin"},"when":{"coprocessorCore":"16","processorType":"Z7010"}},{"command":"copy","from":{"partition":{"primary":1},"path":"/bitstreams/parallella_e16_headless_gpiose_7020.bit.bin"},"to":{"partition":{"primary":1},"path":"/parallella.bit.bin"},"when":{"coprocessorCore":"16","processorType":"Z7020"}}]},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"ts7700","aliases":["ts7700"],"name":"Technologic TS-7700 (EXPERIMENTAL)","arch":"armv5e","state":"DISCONTINUED","instructions":{"windows":["Install <a href=\"http://sourceforge.net/projects/win32diskimager/\">Win32 Disk Imager</a>.\n<br>\nStart Win32 Disk Imager and navigate to the Device OS <code>.img</code> in your downloads.\nSelect &lt;OS-image-download&gt;.img (but replacing <code>&lt;OS-image-download&gt;</code> with your download name)\nas your “Image File”.'\n<br>\nInsert your SD card. In Win32 Disk Imager, select your SD card in the drop down for “Device”\n<br>\nMake 100% sure it is the correct drive and click “Write”.\n<br>\n<strong>Warning!</strong>: Please make sure you have backed-up your SD card first,\nas this will completely erase the contents of your SD card.\n<br>\nWait until it's finished writing.","Safely eject the freshly burnt SD card and insert into the Technologic TS-7700.","Connect your Technologic TS-7700 to the internet, then power it up."],"osx":["Plug your SD card into your computer and in a terminal run <code>diskutil list</code>. You should see your SD card as <code>/dev/diskN</code>, (N=1,2,3,4…)","Unmount your SD card with <code>diskutil umountDisk /dev/diskN</code> where N is your SD card number.","Run <code>sudo dd bs=1m if=~/Downloads/&lt;OS-image-download&gt;.img of=/dev/rdiskN</code>\nbut replacing <code>&lt;OS-image-download&gt;</code> with your download name\nand replacing the <code>of=/dev/rdiskN</code> with the appropriate device name.\n<br>\n<strong>Warning!</strong>&nbsp;Please make sure you have backed-up your SD card first,\nas this will completely erase its contents. You can see a full description of this process\n<a href=\"http://docs.resin.io/#/pages/installing/gettingStarted-TS-7700.md#on-mac-and-linux\">here</a>.","Safely eject the freshly burnt SD card and insert into the Technologic TS-7700.","Connect your Technologic TS-7700 to the internet, then power it up."],"linux":["Run <code>df -h</code> to see what devices are currently mounted.\n<br>\nInsert your SD card.\n<br>\nRun <code>df -h</code> again,the device that wasn't there last time is your SD card.\nIt will be listed as something like <code>/dev/mmcblk0p1</code> or <code>/dev/sdd1</code>.\nThe last part (\"p1\" or \"1\" respectively) is the partition number,\nso the SD should be something like \"/dev/mmcblk0\" or \"/dev/sdd\"\n<br>\nUnmount your SD card with <code>umount /dev/mmcblk0pN</code> or <code>umount /dev/sddN</code> where N is your SD card number.","Run <code>sudo dd bs=1m if=~/Downloads/&lt;OS-image-download&gt;.img of=/dev/rdiskN</code>\nbut replacing <code>&lt;OS-image-download&gt;</code> with your download name\nand replacing the <code>of=/dev/rdiskN</code> with the appropriate device name.\n<br>\n<strong>Warning!</strong>&nbsp;Please make sure you have backed-up your SD card first,\nas this will completely erase its contents. You can see a full description of this process\n<a href=\"http://docs.resin.io/#/pages/installing/gettingStarted-TS-7700.md#on-mac-and-linux\">here</a>.","Safely eject the freshly burnt SD card and insert into the Technologic TS-7700.","Connect your Technologic TS-7700 to the internet, then power it up."]},"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-TS-7700.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-TS-7700.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-TS-7700.md#on-mac-and-linux"},"supportsBlink":false,"yocto":{"machine":"ts7700","image":"resin-image","fstype":"resin-sdcard","version":"yocto-fido","deployArtifact":"resin-image-ts7700.resin-sdcard"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"configuration":{"config":{"partition":{"primary":4,"logical":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"1.1.0"},{"slug":"revpi-core-3","version":1,"aliases":["revpi-core-3"],"name":"Revolution Pi Core 3","arch":"armv7hf","state":"RELEASED","isDefault":true,"instructions":["While not having the Revolution Pi board powered, connect your system to the board's USB port via a micro-USB cable.","Power on the Revolution Pi board.","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","When flashing is complete, power off the board and unplug the micro-USB cable.","Connect your Revolution Pi Core 3 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/raspberrypi3/nodejs/getting-started/#adding-your-first-device"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"revpi-core-3","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-revpi-core-3.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"raspberrypi3-64","version":1,"aliases":["raspberrypi3-64"],"name":"Raspberry Pi 3 (using 64bit OS)","arch":"aarch64","state":"RELEASED","imageDownloadAlerts":[{"type":"warning","message":"The Raspberry Pi 3 is not capable of connecting to 5GHz WiFi networks unless you use an external WiFi adapter that supports it."}],"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 3 (using 64bit OS).","Connect your Raspberry Pi 3 (using 64bit OS) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi3/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi3-64","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi3-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24+rev2"},{"slug":"odroid-xu4","version":1,"aliases":["odroid-ux3","odroid-u3+"],"name":"ODROID-XU4","arch":"armv7hf","state":"RELEASED","private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ODROID-XU4.","Connect your ODROID-XU4 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/odroid-xu4/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/odroid-xu4/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/odroid-xu4/nodejs/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"odroid-xu4","image":"balena-image","fstype":"balenaos-img","version":"yocto-sumo","deployArtifact":"balena-image-odroid-xu4.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"3.0.15+rev80"},{"slug":"spacely-tx2","version":1,"aliases":["spacely-tx2"],"name":"CTI Spacely TX2","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the CTI Spacely TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the carrier board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"spacely-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-spacely-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"photon-nano","version":1,"aliases":["photon-nano"],"name":"CTI Photon Nano","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Place carrier board in force recovery and flash the OS file with <a href=\"https://github.com/balena-os/jetson-flash/\">jetson-flash</a>.","After the Nano eMMC module is flashed, remove power from the board.","Power on the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"photon-nano","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-photon-nano.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":12,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.5+rev1"},{"slug":"via-vab820-quad","version":1,"aliases":["vab820-quad"],"name":"VIA VAB 820-quad (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until the device is offline in the dashboard and disconnect the power cable.","Remove the resinOS installation media.","Set J11 (just next to the micro SD card slot) to position 1-2 (the position closest to the edge of the board).","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the VIA VAB 820-quad.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set J11 (just next to the micro SD card slot) to position 2-3 (the position furthest away from the edge of the board) and then power on the board.","The device is performing a shutdown. Please wait until the device is offline in the dashboard and disconnect the power cable.","Remove the resinOS installation media.","Set J11 (just next to the micro SD card slot) to position 1-2 (the position closest to the edge of the board).","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-VIA-VAB820.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-VIA-VAB820.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-VIA-VAB820.md#on-mac-and-linux"},"supportsBlink":false,"yocto":{"machine":"vab820-quad","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-flasher-vab820-quad.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"imx8m-var-dart","version":1,"name":"Variscite DART-MX8M","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the SW7 BOOT SELECT switch to eMMC.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite DART-MX8M.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set the SW7 BOOT SELECT switch to SDCARD. Insert SD CARD. Power up the Variscite DART-MX8M.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the SW7 BOOT SELECT switch to eMMC.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/imx8m-var-dart/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/imx8m-var-dart/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/imx8m-var-dart/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"imx8m-var-dart","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8m-var-dart.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.11"},{"slug":"imx8mm-lpddr4-evk","version":1,"name":"NXP i.MX8M Mini LPDDR4 EVK (DEVELOPMENT)","arch":"aarch64","state":"DEVELOPMENT","stateInstructions":{"postProvisioning":["Monitor the device in Balena dashboard to see when it entered the post-provisioning state. Leave the state settle for around 10 seconds.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the NXP i.MX8M Mini LPDDR4 EVK.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Remove and re-connect power to the board.","Monitor the device in Balena dashboard to see when it entered the post-provisioning state. Leave the state settle for around 10 seconds.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/imx8mm-lpddr4-evk/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/imx8mm-lpddr4-evk/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/imx8mm-lpddr4-evk/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"imx8mm-lpddr4-evk","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8mm-lpddr4-evk.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.17+rev6"},{"slug":"artik533s","version":1,"aliases":["artik533s"],"name":"Samsung Artik 530s 1G (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Wait 30 seconds or until the red LED 402 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Samsung Artik 530s 1G.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:on.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button.","The device is performing a shutdown. Wait 30 seconds or until the red LED 402 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/artik533s/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/artik533s/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/artik533s/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"artik533s","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-artik533s.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.44.0+rev8.prod"},{"slug":"orange-pi-zero","version":1,"name":"Orange Pi Zero (NEW)","arch":"armv7hf","state":"NEW","community":true,"private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Orange Pi Zero.","Connect your Orange Pi Zero to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/orange-pi-one/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"orange-pi-zero","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-orange-pi-zero.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"cybertan-ze250","version":1,"aliases":["ZE250"],"name":"Cybertan ZE250 (DISCONTINUED)","arch":"i386","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt USB key into the Cybertan ZE250.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect your Cybertan ZE250 to the internet, then power it up.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-ZE250.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-ZE250.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-ZE250.md#on-mac-and-linux"},"yocto":{"machine":"intel-quark","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-flasher-intel-quark.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"nanopc-t4","version":1,"name":"NanoPC-T4 (EXPERIMENTAL)","arch":"aarch64","state":"EXPERIMENTAL","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the NanoPC-T4.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/nanopc-t4/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/nanopc-t4/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/nsnopc-t4/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"nanopc-t4","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-thud","deployArtifact":"resin-image-flasher-nanopc-t4.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.46.1+rev1.prod","logoUrl":"https://files.balena-cloud.com/images/nanopc-t4/2.46.1%2Brev1.prod/logo.svg"},{"slug":"artik710","version":1,"aliases":["artik710"],"name":"Samsung Artik 710 (DISCONTINUED)","arch":"aarch64","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Wait 30 seconds or until the blue LED 703 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Samsung Artik 710.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:on.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button.","The device is performing a shutdown. Wait 30 seconds or until the blue LED 703 is off and switch SW700 to the off position.","Remove the balenaOS installation media.","Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.","Switch SW700 to the on position. Press and hold for 1 second the SW400 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/artik710/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/artik710/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/artik710/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"artik710","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-artik710.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.29.2+rev2.prod"},{"slug":"lcbzu9","version":1,"aliases":[],"name":"Eurotec Lowpad (lcbzu9)","arch":"aarch64","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Eurotec Lowpad (lcbzu9).","Connect your Eurotec Lowpad (lcbzu9) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/","osx":"https://www.balena.io/docs/learn/getting-started/","linux":"https://www.balena.io/docs/learn/getting-started/"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"lcbzu9","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-lcbzu9.balenaos-img"},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"am571x-evm","version":1,"aliases":["am571x-evm"],"name":"AM571X EVM (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the AM571X EVM.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the AM571X EVM and then press the SW3 Power On button.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-AM571X.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-AM571X.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-AM571X.md#on-mac-and-linux"},"supportsBlink":true,"yocto":{"machine":"am57xx-evm","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-morty","deployArtifact":"resin-image-flasher-am57xx-evm.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0-beta12.rev2.prod"},{"slug":"radxa-zero","version":1,"name":"Radxa Zero (NEW)","arch":"aarch64","state":"NEW","instructions":["Enable <a href=https://wiki.radxa.com/Zero/dev/maskrom#Enable_maskrom>maskrom mode</a> and connect you board to your computer over the USB2 port.","Install on your PC the <a href=https://wiki.radxa.com/Zero/dev/maskrom#Install_required_tools>tools</a> required for flashing.","Clear eMMC and set it in UMS mode. Make sure to use <a href=https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin>this loader</a> when following the <a href=https://wiki.radxa.com/Zero/dev/maskrom#Side_loading_binaries>sideloading instructions</a>","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","Connect your Radxa Zero to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/radxa-zero-s905y2/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/radxa-zero-s905y2/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/radxa-zero-s905y2/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"radxa-zero-s905y2","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-radxa-zero-s905y2.balenaos-img","compressed":true},"configuration":{"config":{"partition":1,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.18+rev100"},{"slug":"radxa-cm3-rpicm4-ioboard","version":1,"name":"Radxa CM3 on Raspberry Pi Compute Module 4 IO Board (NEW)","arch":"aarch64","state":"NEW","stateInstructions":{"postProvisioning":[""]},"instructions":["Enable <a href=https://wiki.radxa.com/Rock3/installusb-install-radxa-cm3-rpi-cm4-io#Boot_the_board_to_maskrom_mode>maskrom mode</a> and connect you board to your computer over the MicroUSB port.","Install on your PC the <a href=https://wiki.radxa.com/Rock3/install/rockchip-flash-tools>rockchip flash tools</a> required for flashing.","Clear eMMC and set it in UMS mode. Make sure to use <a href=https://dl.radxa.com/rock3/images/loader/rk356x_spl_loader_ddr1056_v1.06.110.bin>this loader</a> when following the <a href=https://wiki.radxa.com/Rock3/installusb-install-radxa-cm3-rpi-cm4-io#Begin_Installation_USB_-.3E_eMMC>USB provisioning instructions</a>",""],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/radxa-cm3-io-rk3566/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/radxa-cm3-io-rk3566/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/radxa-cm3-io-rk3566/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"radxa-cm3-io-rk3566","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-radxa-cm3-io-rk3566.balenaos-img","compressed":true},"configuration":{"config":{"partition":3,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.1.18+rev100"},{"slug":"kitra520","version":1,"aliases":["kitra520"],"name":"RushUp Kitra 520 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device has performed a shutdown. Press the power switch PWR SW to the off position.","Remove the resinOS installation media.","Remove the Artik520 module from the evaluation carrier and plug it on the Kitra520 carrier.","Press and hold the power button PB1 - PB2 until you hear a double buzz sound."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the RushUp Kitra 520.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW2 dip switch to position 1:on, 2:on.  Also, make sure jumpers J20 and J33 are set towards the edge of the board.","Press and hold the power button PB1 - PB2 until you hear a double buzz sound.","The device has performed a shutdown. Press the power switch PWR SW to the off position.","Remove the resinOS installation media.","Remove the Artik520 module from the evaluation carrier and plug it on the Kitra520 carrier.","Press and hold the power button PB1 - PB2 until you hear a double buzz sound."],"gettingStartedLink":{"windows":"https://docs.resin.io/kitra520/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/kitra520/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/kitra520/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"kitra520","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-kitra520.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.13.6+rev1.prod"},{"slug":"generic","version":1,"name":"Generic","arch":"amd64","state":"RELEASED","isDependent":true,"yocto":{"machine":"","deployArtifact":"empty","archive":true},"options":[{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"private":false,"buildId":"1.2.0"},{"slug":"jetson-orin-nano-devkit-nvme","version":1,"name":"Nvidia Jetson Orin Nano 8GB (SD) Devkit NVME","arch":"aarch64","state":"RELEASED","instructions":["After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-orin-nano-devkit-nvme/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-orin-nano-devkit-nvme/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-orin-nano-devkit-nvme/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-orin-nano-devkit-nvme","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-jetson-orin-nano-devkit-nvme.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"nitrogen6x","version":1,"aliases":["nitrogen6x"],"name":"Nitrogen 6X (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nitrogen 6X.","Connect your Nitrogen 6X to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/nitrogen6x/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/nitrogen6x/nodejs/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/nitrogen6x/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"nitrogen6x","image":"resin-image","fstype":"resinos-img","version":"yocto-rocko","deployArtifact":"resin-image-nitrogen6x.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.31.0+rev2.prod"},{"slug":"n310-tx2","version":1,"aliases":["n310-tx2"],"name":"Aetina N310 TX2 (DISCONTINUED)","arch":"aarch64","state":"DISCONTINUED","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Aetina N310 TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the N310 carrier board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"n310-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-n310-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.5.21+rev7"},{"slug":"coral-dev","version":1,"name":"Coral Dev Board (NEW)","arch":"aarch64","state":"NEW","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the eMMC position.","Remove and re-connect power to the board."]},"instructions":["Set the BOOT_SELECT switch to the SD-CARD position.","Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Coral Dev Board.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT_SELECT switch to the eMMC position.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/","osx":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/","linux":"https://www.balena.io/docs/learn/getting-started/coral-dev/python/"},"supportsBlink":false,"yocto":{"machine":"coral-dev","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-warrior","deployArtifact":"balena-image-flasher-coral-dev.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.33"},{"slug":"apalis-imx6q","version":1,"aliases":["apalis-imx6"],"name":"Apalis iMX6q (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Apalis iMX6q.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect the carrier board to a host computer using a serial cable. (This step may differ based on what carrier board you have)","Power the module. Press SPACE when prompted by U-Boot to stop execution and run the following command `run sdboot`","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the resinOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-apalis-imx6.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-apalis-imx6.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-apalis-imx6.md#on-mac-and-linux"},"supportsBlink":false,"yocto":{"machine":"apalis-imx6","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-flasher-apalis-imx6.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"beaglebone-green","version":1,"name":"BeagleBone Green","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBone Green.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the BeagleBone Green while holding down the small button near the SD slot. You need to keep it pressed until the blue LEDs start flashing wildly.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone-green","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beaglebone-green.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev3"},{"slug":"raspberrypi400-64","version":1,"aliases":["raspberrypi400-64"],"name":"Raspberry Pi 400 (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Raspberry Pi 400.","Connect your Raspberry Pi 400 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi400/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi400/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi400/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi400-64","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-raspberrypi400-64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"beagleplay","version":1,"aliases":["beagleplay"],"name":"BeaglePlay","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeaglePlay.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the BeaglePlay after inserting the flasher image into the SDCard Slot. The device will power down automatically after the flashing is complete. Remove the SDCard and restart the device.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beagleplay","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beagleplay.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24"},{"slug":"floyd-nano","version":1,"name":"Floyd Nano BB02A eMMC (DISCONTINUED)","arch":"aarch64","state":"DISCONTINUED","community":true,"instructions":["Put the Floyd Nano BB02 Rev.A (eMMC) board in recovery mode, ensure USB2.0 port 1 is in Device mode and connect it it your PC with USB cable.","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"floyd-nano","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-floyd-nano.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":12,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.107.37"},{"slug":"intel-edison","version":1,"aliases":["edison"],"name":"Intel Edison","arch":"i386","state":"RELEASED","gettingStartedLink":"http://docs.resin.io/#/pages/installing/gettingStarted-Edison.md","instructions":{"windows":["Install Windows drivers for Edison from <a href=\"https://downloadmirror.intel.com/26993/eng/IntelEdisonDriverSetup1.2.1.exe\">here</a>","Unplug the Intel Edison board from your system.","Unzip the downloaded Device OS file.","Open a terminal with administrative privileges and execute the following from the unzipped directory:\n<br>\n<code>flashall.bat</code>","Plug the Intel Edison as per the instructions on your terminal.\n<br>\nYou can check the progress of the provisioning on your terminal."],"osx":["You need <a href=\"https://www.macports.org/\">MacPorts</a> installed on your system.\n<br>\nRun the following to install <code>dfu-util</code>, <code>usbutils</code> and <code>coreutils</code>:\n<code>sudo port install dfu-util usbutils coreutils && sudo port activate dfu-util</code>","Unplug the Intel Edison board from your system.","Unzip the downloaded Device OS file.","Execute the following from the unzipped directory:\n<br>\n<code>sudo ./flashall.sh</code>\n<br>\nIf you have trouble executing, you may need to modify the file permissions first:\n<br>\n<code>sudo chmod +x ./flashall.sh</code>","Plug the Intel Edison as per the instructions on your terminal.\n<br>\nYou can check the progress of the provisioning on your terminal."],"linux":["Install <code>dfu-util</code> and <code>coreutils</code> from your distributions repos. For example, for Ubuntu:\n<br>\n<code>apt-get install dfu-util coreutils</code>","Unplug the Intel Edison board from your system.","Unzip the downloaded Device OS file.","Execute the following from the unzipped directory:\n<br>\n<code>sudo ./flashall.sh</code>\n<br>\nIf you have trouble executing, you may need to modify the file permissions first:\n<br>\n<code>sudo chmod +x ./flashall.sh</code>","Plug the Intel Edison as per the instructions on your terminal.\n<br>\nYou can check the progress of the provisioning on your terminal."]},"yocto":{"machine":"edison","image":"resin-image","fstype":"zip","version":"yocto-sumo","deployArtifact":"resin-edison","archive":true,"compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Type","name":"network","type":"list","choices":["wifi"],"hidden":true},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"image":"resin-image-edison.hddimg","path":"/config.json"}},"initialization":{"dependencies":{"osx":[{"name":"greadlink","instructions":"This utility is included in the `coreutils` package. Run:\n\n\t$ sudo port install coreutils\n\nOr with Homebrew:\n\n\t$ brew install coreutils"},{"name":"dfu-util","instructions":"Install dfu-util by running:\n\n\t$ sudo port install dfu-util@0.7\n\nOr with Homebrew:\n\n\t$ brew install dfu-util"}],"linux":[{"name":"readlink","instructions":"Install `coreutils` from your distribution repos. For example, for Ubuntu:\n\n\t$ sudo apt-get install coreutils"},{"name":"dfu-util","instructions":"Install `dfu-util` from your distribution repos. For example, for Ubuntu:\n\n\t$ sudo apt-get install dfu-util"}],"win32":[{"name":"dfu-util","instructions":"Install Windows drivers for Edison from:\n\n\thttp://downloadmirror.intel.com/24909/eng/IntelEdisonDriverSetup1.2.1.exe"}]},"operations":[{"command":"run-script","script":"flashall.bat","when":{"os":"win32"}},{"command":"run-script","script":"flashall.sh","when":{"os":"osx"}},{"command":"run-script","script":"flashall.sh","when":{"os":"linux"}}]},"private":false,"buildId":"2.31.5+rev1.prod"},{"slug":"beagleboard-xm","version":1,"name":"BeagleBoard-XM","arch":"armv7hf","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBoard-XM.","Connect your BeagleBoard-XM to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/pocketbeagle/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beagleboard-xm","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-beagleboard-xm.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"3.1.3"},{"slug":"forecr-dsb-ornx-orin-nano-8gb","version":1,"name":"Forecr DSBOARD-ORNX-LAN Nano 8GB","arch":"aarch64","state":"RELEASED","instructions":["Put the board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/","osx":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/","linux":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/"},"supportsBlink":false,"yocto":{"machine":"forecr-dsb-ornx-orin-nano-8gb","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-forecr-dsb-ornx-orin-nano-8gb.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"cnx100-xavier-nx","version":1,"aliases":["cnx100-xavier-nx"],"name":"Auvidea CNX100 Xavier NX","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Put the carrier board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"cnx100-xavier-nx","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-cnx100-xavier-nx.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":9},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"iot-gate-imx8plus-d1d8","version":1,"name":"Compulab IOT-GATE-iMX8PLUS 1G-8G DRAM","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["Remove and re-connect power to the board."]},"instructions":["Please check the readme or the image download modal in balena-cloud for flashing instructions","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.balena.io/iot-gate-imx8plus/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.balena.io/iot-gate-imx8plus/getting-started/#adding-your-first-device","linux":"http://docs.balena.io/iot-gate-imx8plus/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"iot-gate-imx8plus-d1d8","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-iot-gate-imx8plus-d1d8.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3+rev6"},{"slug":"jn30b-nano","version":1,"aliases":["jn30b-nano"],"name":"Auvidea JN30B Nano","arch":"aarch64","state":"RELEASED","community":"true","instructions":["Put the Auvidea JN30B Nano board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing of the Nano eMMC module is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jn30b-nano","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jn30b-nano.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":12,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev4"},{"slug":"etcher-pro","version":1,"name":"Etcher Pro (NEW)","arch":"aarch64","state":"NEW","private":false,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove microSD card from flashing slot and toggle DSW1 switch to OFF position","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Etcher Pro.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert microSD card into flashing slot and toggle DSW1 switch to ON position. Power-up board","The device is performing a shutdown. Please wait until all LEDs are off.","Remove microSD card from flashing slot and toggle DSW1 switch to OFF position","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/"},"supportsBlink":false,"yocto":{"machine":"etcher-pro","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-warrior","deployArtifact":"balena-image-flasher-etcher-pro.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.0.1+rev4"},{"slug":"hummingboard","version":1,"aliases":["solidrun-imx6","cubox-i","hummingboard","hummingboard2"],"name":"Hummingboard (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Hummingboard.","Connect your Hummingboard to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/hummingboard/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/hummingboard/nodejs/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/hummingboard/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"solidrun-imx6","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-rocko","deployArtifact":"resin-image-flasher-solidrun-imx6.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.41.0+rev1.prod"},{"slug":"blackboard-tx2","version":1,"aliases":["blackboard-tx2"],"name":"Nvidia blackboard TX2 (DISCONTINUED)","arch":"aarch64","state":"DISCONTINUED","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nvidia blackboard TX2.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Remove and re-connect power to the board.","Press and hold for 1 second the POWER push button.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"blackboard-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-blackboard-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.5.21+rev7"},{"slug":"nitrogen8mm","version":1,"name":"Nitrogen8M Mini SBC","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["Monitor the device in Balena dashboard to see when it entered the post-provisioning state. Leave the state settle for around 10 seconds.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Nitrogen8M Mini SBC.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Remove and re-connect power to the board.","Monitor the device in Balena dashboard to see when it entered the post-provisioning state. Leave the state settle for around 10 seconds.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/nitrogen8mm-sbc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/nitrogen8mm-sbc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/nitrogen8mm-sbc/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"nitrogen8mm","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-nitrogen8mm.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.17+rev3"},{"slug":"raspberrypi4-unipi-neuron","version":1,"name":"UniPi Neuron (Raspberry Pi 4) (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the UniPi Neuron (Raspberry Pi 4).","Connect your UniPi Neuron (Raspberry Pi 4) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/raspberrypi4/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"raspberrypi4-unipi-neuron","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-raspberrypi4-unipi-neuron.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.3+rev4"},{"slug":"iot2000","version":1,"aliases":["iot2000"],"name":"Siemens IOT2000 (DISCONTINUED)","arch":"i386-nlp","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Siemens IOT2000.","Connect your Siemens IOT2000 to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/iot2000/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/iot2000/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/iot2000/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"iot2000","image":"resin-image","fstype":"resinos-img","version":"yocto-rocko","deployArtifact":"resin-image-iot2000.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.31.0+rev6.prod"},{"slug":"isg-503","version":1,"name":"Rocktech ISG 503","arch":"aarch64","state":"RELEASED","community":true,"stateInstructions":{"postProvisioning":["Power on the device","After flashing is completed the status LED will stop blinking, the ethernet LEDs will turn off and the device will enter Post Provisioning state in the dashboard","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Rocktech ISG 503.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power on the device","After flashing is completed the status LED will stop blinking, the ethernet LEDs will turn off and the device will enter Post Provisioning state in the dashboard","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/isg-503/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/isg-503/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/isg-503/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"isg-503","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-isg-503.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.115.18+rev140"},{"slug":"imx6ul-var-dart","version":1,"name":"Variscite DART-6UL","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set SW2 dip switch to 1(on position).","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite DART-6UL.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW1 and SW2 dip switches to 0(off position). Power up the Variscite DART-6UL.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set SW2 dip switch to 1(on position).","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/dart6ul/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"imx6ul-var-dart","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-imx6ul-var-dart.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.7.5+rev1"},{"slug":"imx7-var-som","version":1,"name":"Variscite VAR-SOM-MX7","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown, please wait until the  LEDs are off and the device enters post-provisioning state in Balena cloud.","Remove the balenaOS installation media.","Set the SW1 BOOT SELECT switch to eMMC.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite VAR-SOM-MX7.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set the SW1 BOOT SELECT switch to SDCARD. Insert SD CARD. Power up the Variscite VAR-SOM-MX7.","The device is performing a shutdown, please wait until the  LEDs are off and the device enters post-provisioning state in Balena cloud.","Remove the balenaOS installation media.","Set the SW1 BOOT SELECT switch to eMMC.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/imx7-var-som/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/imx7-var-som/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/imx7-var-som/getting-started/#adding-your-first-device"},"yocto":{"machine":"imx7-var-som","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-imx7-var-som.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.4+rev2"},{"slug":"aio-3288c","version":1,"aliases":["aio-3288c"],"name":"AIO 3288C","arch":"armv7hf","state":"RELEASED","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the AIO 3288C.","Connect your AIO 3288C to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/","osx":"https://www.balena.io/docs/","linux":"https://www.balena.io/"},"supportsBlink":true,"yocto":{"machine":"aio-3288c","image":"resin-image","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-aio-3288c.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.38.3+rev10.prod","logoUrl":"https://files.balena-cloud.com/images/aio-3288c/2.38.3%2Brev10.prod/logo.svg"},{"slug":"forecr-dsb-ornx-lan-orin-nx-16gb","version":1,"name":"Forecr DSBOARD-ORNX-LAN Orin NX 16GB","arch":"aarch64","state":"RELEASED","instructions":["Put the board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/","osx":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/","linux":"https://docs.balena.io/learn/getting-started/forecr-dsb-ornx/nodejs/"},"supportsBlink":false,"yocto":{"machine":"forecr-dsb-ornx-lan-orin-nx-16gb","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-forecr-dsb-ornx-lan-orin-nx-16gb.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.5.25+rev2"},{"slug":"jetson-orin-nx-seeed-j4012","version":1,"name":"Nvidia Jetson Orin NX in Seeed ReComputer J4012","arch":"aarch64","state":"RELEASED","instructions":["Put the Nvidia Jetson Orin NX in Seeed ReComputer J4012 board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> at v0.5.32 or newer to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/jetson-orin-nx-seeed-j4012/nodejs/","osx":"https://docs.balena.io/learn/getting-started/jetson-orin-nx-seeed-j4012/nodejs/","linux":"https://docs.balena.io/learn/getting-started/jetson-orin-nx-seeed-j4012/nodejs/"},"supportsBlink":false,"yocto":{"machine":"jetson-orin-nx-seeed-j4012","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-jetson-orin-nx-seeed-j4012.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"jetson-orin-nano-seeed-j3010","version":1,"name":"Seeed ReComputer J3010","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Orin Seeed J3010 in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/jetson-orin-nano-seeed-j3010/nodejs/","osx":"https://docs.balena.io/learn/getting-started/jetson-orin-nano-seeed-j3010/nodejs/","linux":"https://docs.balena.io/learn/getting-started/jetson-orin-nano-seeed-j3010/nodejs/"},"supportsBlink":false,"yocto":{"machine":"jetson-orin-nano-seeed-j3010","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-jetson-orin-nano-seeed-j3010.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"nanopi-r2s","version":1,"name":"NanoPi R2S (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the NanoPi R2S.","Connect your NanoPi R2S to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/nanopi-r2s/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/nanopi-r2s/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/nanopi-r2s/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"nanopi-r2s","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-nanopi-r2s.balenaos-img","compressed":true},"configuration":{"config":{"partition":4,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"5.4.1+rev39"},{"slug":"jetson-orin-nx-xavier-nx-devkit","version":1,"name":"Nvidia Jetson Orin NX in Xavier NX Devkit NVME","arch":"aarch64","state":"RELEASED","instructions":["After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-orin-nx-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-orin-nx-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-orin-nx-xavier-nx-devkit/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-orin-nx-xavier-nx-devkit","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-flasher-jetson-orin-nx-xavier-nx-devkit.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"7.0.3"},{"slug":"zynq-xz702","version":1,"aliases":["zc702-zynq7"],"name":"Zynq ZC702 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","instructions":["Write the OS file you downloaded to an SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Zynq ZC702.","Connect your Zynq ZC702 to the internet, then power it up."],"gettingStartedLink":{"windows":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#windows","osx":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#on-mac-and-linux","linux":"http://docs.resin.io/#/pages/installing/gettingStarted-Zynq-ZC702.md#on-mac-and-linux"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":0,"default":1}]}],"yocto":{"machine":"zc702-zynq7","image":"resin-image","fstype":"resinos-img","version":"yocto-jethro","deployArtifact":"resin-image-zc702-zynq7.resinos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"private":false,"buildId":"2.0.0+rev1.prod"},{"slug":"cl-som-imx8","version":1,"name":"Compulab MX8M","arch":"aarch64","state":"RELEASED","private":false,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Compulab MX8M.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert SD CARD. Press SW5 followed by SW6. Release SW5 then release SW6.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/cl-som-imx8/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/cl-som-imx8/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/cl-som-imx8/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"cl-som-imx8","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-flasher-cl-som-imx8.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.51.1+rev2.prod","logoUrl":"https://files.balena-cloud.com/images/cl-som-imx8/2.51.1%2Brev2.prod/logo.svg"},{"slug":"beaglebone-green-gateway","version":1,"name":"BeagleBone Green Gateway","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["Wait 5 seconds after the blue leds stopped flashing wildly, then remove power from the board. On some boards the leds will shut down completely.","Remove the balenaOS installation media.","Re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBone Green Gateway.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the BeagleBone Green Gateway while holding down the small button near the SD slot. You need to keep it pressed until the blue LEDs start flashing wildly.","Wait 5 seconds after the blue leds stopped flashing wildly, then remove power from the board. On some boards the leds will shut down completely.","Remove the balenaOS installation media.","Re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone-green-gateway","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beaglebone-green-gateway.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev3"},{"slug":"jetson-nano-2gb-devkit","version":1,"name":"Nvidia Jetson Nano 2GB Devkit SD","arch":"aarch64","state":"RELEASED","instructions":["Put the NVidia Jetson Nano 2GB Devkit in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> to provision the device.","After flashing of the Nano SD-CARD module is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-nano/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"jetson-nano-2gb-devkit","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-jetson-nano-2gb-devkit.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":14,"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.12.11+rev4"},{"slug":"forecr-dsb-nx2-xavier-nx-emmc","version":1,"name":"Forecr DSBOARD NX2 Xavier NX eMMC","arch":"aarch64","state":"RELEASED","community":true,"instructions":["Put the carrier board in recovery mode","Unzip BalenaOS image and use <a href=\"https://github.com/balena-os/jetson-flash\">Jetson Flash</a> on branch forecr_dsboard_nx2 to provision the device.","After flashing is completed, please wait until the board is rebooted"],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-xavier-nx-devkit-emmc/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"forecr-dsb-nx2-xavier-nx-emmc","image":"balena-image","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-forecr-dsb-nx2-xavier-nx-emmc.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":15},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2.113.31"},{"slug":"fincm3","version":1,"aliases":["fincm3"],"name":"Balena Fin (CM3)","arch":"armv7hf","state":"RELEASED","instructions":["While not having the Fin board powered, connect your system to the board's DBG/PRG port via a micro-USB cable. Note for the Fin v1.1, only power the Fin from the PRG port for flashing.","Only for the Fin v1.0, power on the Fin by attaching power to either the Barrel or the Phoenix connector.","Write the OS to the internal MMC storage device. We recommend using <a href=http://www.etcher.io/>Etcher</a>.","When flashing is complete, power off the board by detaching the power if connected, and unplug the DGB micro-USB cable.","Connect your Balena Fin (CM3) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/fincm3/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/fincm3/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/fincm3/nodejs/"},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"fincm3","image":"balena-image","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-fincm3.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"2022.7.0"},{"slug":"asus-tinker-board-s","version":1,"aliases":["asus-tinker-board-s"],"name":"Asus Tinker Board S (EXPERIMENTAL)","arch":"armv7hf","state":"EXPERIMENTAL","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Before powering up the Asus Tinker Board S, make sure that the jumper between the 5V power supply and the HDMI connector is in the parking (no function) mode, as ilustrated in this link https://tinkerboarding.co.uk/wiki/index.php/Setup","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Asus Tinker Board S.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Before powering up the Asus Tinker Board S, make sure that the jumper between the 5V power supply and the HDMI connector is in the MASKROM mode, as ilustrated in this link https://tinkerboarding.co.uk/wiki/index.php/Setup","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Before powering up the Asus Tinker Board S, make sure that the jumper between the 5V power supply and the HDMI connector is in the parking (no function) mode, as ilustrated in this link https://tinkerboarding.co.uk/wiki/index.php/Setup","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/asus-tinker-board-s/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/asus-tinker-board-s/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/asus-tinker-board-s/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"yocto":{"machine":"asus-tinker-board-s","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-sumo","deployArtifact":"resin-image-flasher-asus-tinker-board-s.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.38.3+rev1.prod","logoUrl":"https://files.balena-cloud.com/images/asus-tinker-board-s/2.38.3%2Brev1.prod/logo.svg"},{"slug":"artik5","version":1,"aliases":["artik5 artik520"],"name":"Samsung Artik 520 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device has performed a shutdown. Press the power switch PWR SW to the off position.","Remove the resinOS installation media.","Set SW2 dip switch to position 1:off, 2:off.","Press the power switch PWR SW to the on position. Press and hold for 1 second the SW3 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Samsung Artik 520.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW2 dip switch to position 1:on, 2:on.  Also, make sure jumpers J20 and J33 are set towards the edge of the board.","Press the power switch PWR SW to the on position. Press and hold for 1 second the SW3 POWER push button.","The device has performed a shutdown. Press the power switch PWR SW to the off position.","Remove the resinOS installation media.","Set SW2 dip switch to position 1:off, 2:off.","Press the power switch PWR SW to the on position. Press and hold for 1 second the SW3 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/artik5/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/artik5/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/artik5/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"artik520","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-artik520.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.13.6+rev1.prod"},{"slug":"imx8mm-var-som","version":1,"name":"Variscite VAR-SOM-MX8M-MINI Devkit","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT SELECT switch to INT.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Variscite VAR-SOM-MX8M-MINI Devkit.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set the BOOT SELECT switch to EXT. Insert SD CARD. Power up the Variscite VAR-SOM-MX8M-MINI Devkit.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Set the BOOT SELECT switch to INT.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"http://docs.resin.io/imx8mm-var-som/nodejs/getting-started/#adding-your-first-device","osx":"http://docs.resin.io/imx8mm-var-som/getting-started/#adding-your-first-device","linux":"http://docs.resin.io/imx8mm-var-som/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"imx8mm-var-som","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-imx8mm-var-som.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.11+rev1"},{"slug":"ccimx8x-sbc-pro","version":1,"aliases":["ccimx8x-sbc-pro"],"name":"ConnectCore 8X SBC Pro (NEW)","arch":"aarch64","state":"NEW","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Configure the boot microswitches (S2) for internal (eMMC) boot (SW1 OFF and SW2 OFF).","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the ConnectCore 8X SBC Pro.","Make sure your SBC contains a system-on-module with a 2GB i.MX8X quad B0 system-on-chip. Different module variants are not supported by this device type and will not boot.","Configure the boot microswitches (S2) for SD boot (SW1 OFF and SW2 ON).","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect your ConnectCore 8X SBC Pro to the internet, then power it up.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Configure the boot microswitches (S2) for internal (eMMC) boot (SW1 OFF and SW2 OFF).","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/ccimx8x-sbc-pro/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/ccimx8x-sbc-pro/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/ccimx8x-sbc-pro/nodejs/"},"supportsBlink":false,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"ccimx8x-sbc-pro","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-flasher-ccimx8x-sbc-pro.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"5.2.4"},{"slug":"astro-tx2","version":1,"aliases":["astro-tx2"],"name":"CTI Astro TX2 G+","arch":"aarch64","state":"RELEASED","community":true,"stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the CTI Astro TX2 G+.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Connect power to the carrier board.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.balena.io/jetson-tx2/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"astro-tx2","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-honister","deployArtifact":"balena-image-flasher-astro-tx2.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev1"},{"slug":"beaglebone-green-wifi","version":1,"name":"BeagleBone Green Wireless","arch":"armv7hf","state":"RELEASED","stateInstructions":{"postProvisioning":["Wait 5 seconds after the blue leds stopped flashing wildly, then remove power from the board. On some boards the leds will shut down completely.","Remove the balenaOS installation media.","Re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBone Green Wireless.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Power up the BeagleBone Green Wireless while holding down the small button near the SD slot. You need to keep it pressed until the blue LEDs start flashing wildly.","Wait 5 seconds after the blue leds stopped flashing wildly, then remove power from the board. On some boards the leds will shut down completely.","Remove the balenaOS installation media.","Re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone-green-wifi","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beaglebone-green-wifi.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.0+rev3"},{"slug":"beaglebone-ai64","version":1,"aliases":["beaglebone-ai-64"],"name":"BeagleBone AI-64","arch":"aarch64","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BeagleBone AI-64.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert the SD card while powered down. Power up the BeagleBone AI-64 while holding down the BOOT/SW1 button at the opposite side of the USB Type-C port. You need to keep it pressed until the LEDs start flashing wildly.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board."],"gettingStartedLink":{"windows":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/beaglebone/nodejs/getting-started/#adding-your-first-device"},"yocto":{"machine":"beaglebone-ai64","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-beaglebone-ai64.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.10.24"},{"slug":"eg5120-imx8mp","version":1,"name":"Robustel EG5120 i.MX8MP 2GB DRAM","arch":"aarch64","state":"RELEASED","stateInstructions":{"postProvisioning":["The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board.","The RUN LED blinks once per second indicating a normal boot."]},"instructions":["Warning: If upgrading to BalenaOS from the RobustOS Pro system for the first time, you need to upgrade u-boot first. Please contact support@robustel.com for the upgrade files and instructions. If BalenaOS is already installed, this step can be skipped.","Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Robustel EG5120 i.MX8MP 2GB DRAM.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Insert the SD Card and power on the board. Let it boot form SD Card and perform the automatic install of balenaOS onto the eMMC.","The RUN led fast flashing indicates a flasher boot, while all leds are off when flasher complete.","The device is performing a shutdown. Please wait until all LEDs are off.","Remove the balenaOS installation media.","Remove and re-connect power to the board.","The RUN LED blinks once per second indicating a normal boot."],"gettingStartedLink":{"windows":"https://docs.balena.io/learn/getting-started/eg5120-imx8mp/nodejs/","osx":"https://docs.balena.io/learn/getting-started/eg5120-imx8mp/nodejs/","linux":"https://docs.balena.io/learn/getting-started/eg5120-imx8mp/nodejs/"},"supportsBlink":false,"yocto":{"machine":"eg5120-imx8mp","image":"balena-image-flasher","fstype":"balenaos-img","version":"yocto-kirkstone","deployArtifact":"balena-image-flasher-eg5120-imx8mp.balenaos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.11.11+rev1"},{"slug":"artik10","version":1,"aliases":["artik10"],"name":"Samsung Artik 10 (DISCONTINUED)","arch":"armv7hf","state":"DISCONTINUED","stateInstructions":{"postProvisioning":["The device has performed a shutdown. Press the power switch PSW1 to the off position.","Remove the resinOS installation media.","Set SW2 dip switch to position 1:off, 2:off.","Press the power switch PSW1 to the on position. Press and hold for 1 second the SW3 POWER push button."]},"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Samsung Artik 10.","<strong role=\"alert\">Warning!</strong> This will also completely erase internal storage media, so please make a backup first.","Set SW2 dip switch to position 1:on, 2:on. Also, make sure jumpers J20 and J36 are set towards the edge of the board.","Press the power switch PSW1 to the on position. Press and hold for 1 second the SW3 POWER push button.","The device has performed a shutdown. Press the power switch PSW1 to the off position.","Remove the resinOS installation media.","Set SW2 dip switch to position 1:off, 2:off.","Press the power switch PSW1 to the on position. Press and hold for 1 second the SW3 POWER push button."],"gettingStartedLink":{"windows":"https://docs.resin.io/artik10/nodejs/getting-started/#adding-your-first-device","osx":" https://docs.resin.io/artik10/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/artik10/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":false,"yocto":{"machine":"artik10","image":"resin-image-flasher","fstype":"resinos-img","version":"yocto-pyro","deployArtifact":"resin-image-flasher-artik10.resinos-img","compressed":true},"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"private":false,"buildId":"2.13.6+rev1.prod"},{"slug":"generic-aarch64","version":1,"name":"Generic AARCH64 (ARMv8) (NEW)","arch":"aarch64","state":"NEW","instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the Generic AARCH64 (ARMv8).","Connect your Generic AARCH64 (ARMv8) to the internet, then power it up."],"gettingStartedLink":{"windows":"https://www.balena.io/docs/learn/getting-started/generic-aarch64/nodejs/","osx":"https://www.balena.io/docs/learn/getting-started/generic-aarch64/nodejs/","linux":"https://www.balena.io/docs/learn/getting-started/generic-aarch64/nodejs/"},"supportsBlink":false,"yocto":{"machine":"generic-aarch64","image":"balena-image","fstype":"balenaos-img","version":"yocto-scarthgap","deployArtifact":"balena-image-generic-aarch64.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"options":[{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"buildId":"7.0.3+rev2"},{"slug":"bananapi-m1-plus","version":1,"name":"BananaPi-M1+","arch":"armv7hf","state":"RELEASED","private":false,"instructions":["Write the OS file you downloaded to your SD card. We recommend using <a href=\"http://www.etcher.io/\">Etcher</a>.","Insert the freshly burnt SD card into the BananaPi-M1+.","Connect your BananaPi-M1+ to the internet, then power it up."],"gettingStartedLink":{"windows":"https://docs.resin.io/bananapi-m1-plus/nodejs/getting-started/#adding-your-first-device","osx":"https://docs.resin.io/bananapi-m1-plus/nodejs/getting-started/#adding-your-first-device","linux":"https://docs.resin.io/bananapi-m1-plus/nodejs/getting-started/#adding-your-first-device"},"supportsBlink":true,"options":[{"isGroup":true,"name":"network","message":"Network","options":[{"message":"Network Connection","name":"network","type":"list","choices":["ethernet","wifi"]},{"message":"Wifi SSID","name":"wifiSsid","type":"text","when":{"network":"wifi"}},{"message":"Wifi Passphrase","name":"wifiKey","type":"password","when":{"network":"wifi"}}]},{"isGroup":true,"isCollapsible":true,"collapsed":true,"name":"advanced","message":"Advanced","options":[{"message":"Check for updates every X minutes","name":"appUpdatePollInterval","type":"number","min":10,"default":10}]}],"yocto":{"machine":"bananapi-m1-plus","image":"balena-image","fstype":"balenaos-img","version":"yocto-dunfell","deployArtifact":"balena-image-bananapi-m1-plus.balenaos-img","compressed":true},"configuration":{"config":{"partition":{"primary":1},"path":"/config.json"}},"initialization":{"options":[{"message":"Select a drive","type":"drive","name":"drive"}],"operations":[{"command":"burn"}]},"buildId":"6.8.7"}]}